The repeater KYMASGARD® RP2-FEM-UP is a device for in-wall or on-wall installation. It is used for one-time amplification of radio telegrams between radio transmitters and radio receivers and is applied in cases of range of coverage problems. The RP2-FEM-UP just needs to be connected to supply voltage. Teaching-in of radio transmitters is not necessary. All telegrams received valid are amplified and sent off again. The RP2-FEM-UP features two operating modes that can be selected via LED pushbuttons. In 1-level-mode, telegrams are only amplified once, i.e. just original telegrams are repeated. In 2-level-mode, also telegrams received from repeaters in 1-level-mode are amplified and sent off again in addition.

Radio signal receiver, repeater, 2-level KYMASGARD® RP2-FEM-UP